It may come as a surprise to you but up until recently, there had been no regulation dedicated specifically to Pollution Control Units for Commercial Cooking. Previously most PCU’s for Commercial Cooking were listed to UL 1978 standard for Grease Duct Construction or UL 710 Standard Exhaust Hoods for Commercial Cooking Equipment . The requirements […]
Here’s what NFPA 96 has to say about balancing dampers in commercial kitchen exhaust ducts. Chapter 9 Auxiliary Equipment 9.1 Dampers. 9.1.1 Dampers shall not be installed in exhaust ducts or exhaust duct systems. 9.1.2 Where specifically listed for such use or where required as part of a listed device or system, dampers in exhaust […]
What is ASTM F1704 Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems? How does it differ from U.L. 710 rating?
Simply put, the UL 710 Standard for Safety Exhaust Hoods for Commercial Cooking Equipment criteria is a fire safety test and the ASTM F1704 Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems is a performance based test to determine the capture and containment threshold for any given hood under […]
AHJ refers to “The Authority Having Jurisdiction”. The AHJ has final authority for the interpretation of fire and building codes (NFPA, IMC). Although model codes are interepted fairly consistently, a number of municipalities may have variations or interpret certain elements of the codes differently. In some cases there are additions not covered in the model […]
What are the standards for hood overhang to specific cooking equipment? Is it based on UL Listings of the hood?
The specific overhang (ends, front and/or rear) are predicated on the U.L. 710 testing for the specific model of that manufacturer. When testing for capture of visible cooking vapors, the manufacturer establishes the overhangs to test under (6” (152mm) on the ends for example). Assuming they pass the test, that overhang becomes part of their […]